CocoBeach (2 m Anchor)

APPLICATION AND INSTALLATION CONDITIONS:


Necessary Tools:

• Hammer
• Broom
• 1 or 2 people can easily install and remove the Cocobeach.

INSTALLATION / THE DIFFERENT STAGES:

Step 1 : Levelling the floor

Simply level the sand with a broom and then unroll the mat.

Step 2 : Fixing the mat to the floor

Once your mat is unrolled on the ground, anchor the spikes into the eyelets with a hammer.

Special case: Creating a curve

To create a curve, simply superimpose two mats and anchor the lower mat with the stake of the upper mat. Even without an eyelet, the lower Cocobeach mat will be flexible enough to allow the spike to pass through.

UNINSTALL / THE DIFFERENT STAGES:

Step 1 : Sweep the mat

It is recommended to sweep the mat before rolling it up so the sand will not weight it down.

Step 2 : Remove the spikes

Spiked are anchored through eyelets. If the spikes are firmly anchored, it may be necessary to use a pair of pliers.

Step 3 : Roll up the mat

Once the mat is completely dry, roll it up and use the carrying strap provided with the mat for handling and storage.
It should not be stored when it is wet.


MAINTENANCE:

The mat does not require any special maintenance apart from minimal cleaning.
It is recommended to shake the Cocobeach mat regularly or to use a low pressure water jet to remove sand from its surface.